|
Scale Direct offer a wide range of products and services because each business is different , we will support your weighing application or budget, including service, or training as required to make your business successful. to navigate our site just click on the picture for specification & prices, Ex scales require the safety officer to zone the particular area where the equipment is to be used and fall into the following area clasifications.
Class I, Zone 0
A Class I, Zone 0 location is a location where ignitable
concentrations of flammable gases, vapours or liquids: are present
continuously; or are present for long periods of time. Equipment
intended for use in a Class I, Zone 0 area is usually of the intrinsically
safe, "ia," type.
Class I, Zone 1
A Class I, Zone 1 location is a location where ignitable concentrations
of flammable gases, vapours or liquids: are likely to exist under
normal operating conditions; may exist frequently because of
repair or maintenance operations or leakage; or may exist because
of equipment breakdown that simultaneously causes the equipment
to become a source of ignition; or are adjacent to a Class I,
Zone 0 location from which ignitable concentrations could be
communicated. Equipment intended for use in a Class I, Zone 1
area is usually of the flameproof, purged/pressurized, oil immersed,
increased safety, encapsulated or powder filled type.
Class I, Zone 2
A Class I, Zone 2 location is a location: where ignitable concentrations
of flammable gases, vapours or liquids are not likely to occur
in normal operation or, if they do occur, will exist only for a
short period; where volatile flammable liquids, or flammable gases
or vapours exist, but are normally confined within closed containers
where ignitable concentrations of gases, vapours, or liquids are
normally prevented by positive mechanical ventilation; adjacent
to a Class I, Zone 1 location from which ignitable concentrations
could be communicated. Equipment that is intended for use in a
Class I, Zone 2 area is usually of the nonincendive, non-sparking,
restricted breathing, hermetically sealed or sealed device type.
| Catagories |
PMA series Paint-mixing scales with approval certificates for use in Zone 1 hazardous areas Available in single & twin range division sizes Capacities 7,500 g x 0.1g or 7,500 g 0.1g &1,000 g x 0.05gDivision size 0.1 g 0.1 g / 0.05 g Pan size 233 mm 233 mm
For use in explosion proofed areas.Approval EC: Eex ib IIb T4 II 2 G.Includes power supply which is located in safe area and cable run into hazardous area. EC type approved model available - contact us for details.
Model |
Readability |
Capacity |
Pan
size (mm) |
Price
(£) |
PMA 7500-X |
0.1g |
7.5kg |
233 dia |
1290.00 |
PMA 7500D-X |
0.05g
/ 0.1g |
2kg /
7.5kg |
233 dia |
1350.00 |
QC series High resolution IP-65 scale.Approved for use in EX Zone 2 hazardous areas. Backlit display that can be column mounted, remote or mounted on the front of the scale (column Extra £60), built in applications include Counting, unit conversion,% weighing,2nd tare totaising,gross / net readout. Power supply included for location OUTSIDE area.
Model |
Readability |
Capacity |
Pan
size (mm) |
Price
(£) |
| EB6DCE | 0.1g |
7.5kg |
320 x 240 |
1307.00 |
| EB15DCE | 0.2g |
15kg |
320 x 240 |
1388.00 |
| EB35EDE | 0.5g |
35kg |
400 x 300 |
1581.00 |
| EB60EDE | 1g |
65kg |
400 x 300 |
1587.00 |
| EB60FEG | 1g |
60kg |
500 x 400 |
1792.00 |
| EB150FEG | 2g |
150kg |
500 x 400 |
1832.00 |
Zone
2 & 22 Approvals
The new Signum compact industrial scale series has a choice of three powerful technologies, each with a different level of performance.
Additional models from 7Kg, 16Kg and 65Kg also available, plus battery options, profibus, ethernet, Rs232, and
A wide range of options is one of the many exceptional features of the Signum series. Users can choose from three application levels, a variety of resolutions, a large selection of interfaces and other options. This adaptability makes Signum ideal for virtually any use, from simple weighing to demanding applications such as counting with automatic reference weight updating, product data storage with bar code input, or operation with a reference scale in two-scale systems.